The OCZ Vertex 2 Conspiracy: Lost Space, Lost Speed?

Benchmark Results: Iometer Streaming

If the previous page got you worked up, then this page of results should help confirm that we’re onto something here. Streaming IOPS and throughput are fundamentally unchanged in shifting from 34 nm NAND to the new 25 nm devices.

The same goes for writes. There’s basically no change. It’s definitely much more conceivable now that the problem stems from processing overhead associated with smaller randomized files and more aggressive ECC.

Chris Angelini
Chris Angelini is an Editor Emeritus at Tom's Hardware US. He edits hardware reviews and covers high-profile CPU and GPU launches.
  • Mushkin.com have a letter posted on the website that they will not be going to 25nm as the drives life cycle is less than half that of a 3*nm drive. Also the performance is not there.
    Reply
  • cangelini
    LeekayMushkin.com have a letter posted on the website that they will not be going to 25nm as the drives life cycle is less than half that of a 3*nm drive. Also the performance is not there.
    Depending on supply of 34 nm NAND, that's probably not a sustainable position to take. IMFT isn't going to decide to shift back to 34 nm.

    At the risk of contradicting myself, Intel will be using 34 nm NAND on its next-gen 6 Gb/s Elmcrest drives. It's not like the flash isn't disappearing entirely, but the vendors making the switch seem to be motivated largely by cost-cutting reasons.
    Reply
  • Nicely done Mr. Angelini; however, I still think OCZ pulled a nasty car-salesman tactic on their newest 25 nm NAND SSD products, and as such will be looking elsewhere to purchase any future SSD. Blaming resellers or other sources for the SKU is an incompetent way of deflecting fault and has made them look even more silly.
    Reply
  • cangelini
    Thanks radiovan. Like I mentioned in the story, we'll have to see if companies like Corsair and Patriot are able to get their upcoming renamed SKUs onto Newegg, Tigerdirect, Zipzoom, etc.
    Reply
  • binoyski
    Ok, but when will we be able to buy ssd's that are $100 @ 1TB capacity?
    Reply
  • 1.29 Firmware....how nice... pity that ocz only documents 1.28 for the moment.

    And then again why not update the 25nm to 1.29 too?

    But I guess consistency is not always wished when trying to demonstrate something
    Reply
  • nebun
    binoyskiOk, but when will we be able to buy ssd's that are $100 @ 1TB capacity?in about 10 years or so....that's a very big maybe
    Reply
  • dconnors
    Don't lie, Chris. We all know you still have (and love) that little Miata.
    -Devin
    Reply
  • yose3
    binoyskiOk, but when will we be able to buy ssd's that are $100 @ 1TB capacity?
    when you throw a shoes to bush again meaby lol
    Reply
  • Reynod
    It is all about profit.

    The real reason is that going to cheaper flash with a 3000 cycle life to reduce the total cost of production (and therefore increase profit) means ... increasing the amount of redundant memory to replace the flash that dies due to wear ... and that process means better error correction is required to achieve that ... therefore performance is effected.

    Chris ... I got it into one sentence ... albeit a horrible one.

    Nice article mate.
    Reply