SilverStone Rolls Out FP56 Front-Panel

News
By Niels Broekhuijsen
published

Silverstone will soon be rolling out a new front panel utility, the FP56.

SilverStone has announced a new front panel utility, the FP56. The FP56 utility is built to fit in a single optical drive bay and has a number of features including three USB 3.0 ports, one high-current USB 3.0 port for charging power-hungry gadgets, and a multi-card reader. The multi-card reader reads a number of card formats including SD, MemoryStick, xD, and CompactFlash cards. The FP56 is powered by a USB 3.0 header as well as a 4-pin Molex connector.

Included with the device are three front panels, so that the buyer can choose a design that fits in with his or her enclosure. These panels come in silver, black, and white. Moreover, to make better use of the optical drive bay, users can install two 2.5" drives in the back of the FP56.

So far, there is no official word on pricing or availability.

Niels Broekhuijsen
Niels Broekhuijsen

Niels Broekhuijsen is a Contributing Writer for Tom's Hardware US. He reviews cases, water cooling and pc builds.

13 Comments Comment from the forums
  • nukemaster
    I like some of the useful little things SilverStone has been releasing these days.
    Reply
  • Micrology
    It'd be great if they stacked the 2.5s and made it fit in a external 3.5" bay.
    Reply
  • xcaninox
    Good. I liked it, it actually contains everything i would expect it to have.
    Reply
  • Shadz
    This is a great idea! We all need front panels, and by putting the SSDs there instead of elsewhere, we can improve the airflow through the case (if you only have <= 2 SSDs anyway).
    Plus, I have the original HAF922, so it doesn't come w/ USB3s, making this quite handy. I only wish it had a fan controller too... :P
    Reply
  • RedJaron
    Only connects over USB 3.0? Cool, that means the card readers use the speedier interface. Been looking for a reasonably priced front panel card reader, but most the card slots go over USB 2.0 while the 3.0 is only used for the USB ports. Here's hoping Silverstone doesn't jack up the price on this.
    Reply
  • C12Friedman
    This is a nice panel addition IMO. I'll likely be putting one in my Challenger (pre USB 3.0) case provided it's priced reasonably
    Reply
  • dalethepcman
    Now if only something made use of high power usb 3. I wonder if the red port would blow up a mouse...
    Reply
  • osamabinrobot
    man its cool to see some actually useful stuff on here
    Reply
  • TeraMedia
    They could have done differently.
    That same bay could have housed a slim BR/DVD burner (they have a slot loading one! I didn't know that...), the same set of memory card slots, and either a smaller number of USB ports or else stacked ports to reduce space. And even the SSD mounts could have been kept.
    Or, make the face basically be the front of a hot-swap tray for a 2.5" SSD or 3.5" HDD. The whole thing slides out and you can remove the drive if you need to without going into your case. There are 2.5" hot-swap drive accessories that can fit 6 devices into a 5" bay, so they should have been able to fit just two of those plus the ports.
    In the end, I suppose it all depends on the purpose. I wouldn't want hot-swap bays in my living room, and I wouldn't want a mixup of bays and USB ports / card readers if I had empty bays in a mid-tower. So multi-purpose bay accessories are only useful if you have a limited number of bays available.
    Reply
  • ubercake
    This is great and should be considered and utilized in new case designs where the unused drive 5.25" drive bays just take up space in the case. You just pop these in and mount your SSDs.
    Also, imagine not having fixed HDD/SDD (if you could mount 3.5" drives to something like this) bays in the bottom of your case and more open space for better airflow?
    Reply