Antec Displays Gamer PSUs and New Cases

News

Antec at Computex 2011.

New High Current Gamers Plus PSU

Image 1 of 3

-        All certified 80 Plus Bronze

-        Modular cable system

-        500, 650, 750 watt versions

-        Availability: August

-        Price: TBA, but in $100's range

Solo II

Image 1 of 3
Image 1 of 3
Image 1 of 3

-        Mid Tower

-        Aluminum

-        Special system for vibration dampening

-        USB 3.0

-        Availability: September

-        Price: $120

P 280 

Image 1 of 4
Image 1 of 3
Image 1 of 3

-        Successor to P180

-        Alluminum

-        Fan control on the back

-        Lots of expansion slots

-        Availability: November

-        Price: $140

SoundScience Rockus 3D

Image 1 of 3
Image 1 of 2

-        New brand: SoundScience

-        Rockus 3D, a new 2.1 sound system kit

-        Already available at around $160

See more PC Cases News
17 Comments Comment from the forums
  • sceen311
    ahh no 903?
    Reply
  • nebun
    is this a joke? very mediocre products
    Reply
  • ubercake
    Strange to see them using a top-mounted PSU design on the Solo II? Last time I heard, heat rises. Why not let a fan help the heat leave with the path of least resistance through the top like just about every other darn case in this day and age. It seems like a company that has been doing this as long as Antec would have a handle on this.

    What I do like is the cutout in the tray behind the CPU allowing for easy swap out of heat sinks with backplates. I also like that there are no drive bays blocking longer video cards at the bottom front of the case. Most people I know, don't use more than 3 or 4 HDDs/SDDs in their cases. Also, does anyone use more than one or two multi optical or blu-ray drives these days in their gaming or home builds? I think most cases, from a home use standpoint, have too many drive bays which restrict airflow from the intake fans. The Coolermaster HAF series cases allow you to remove these air-blocking bays.

    What kind of innovation is Antec showing us with these cases? None.

    For full tower cases, though I don't like the fact there's no cutout in the tray behind the CPU in the Spedo, I'd like to see more companies doing what is done in the Thermaltake Spedo case by which two exhaust fans are at the rear of the case at the top in addition to allowing one big or two small top exhaust fans. Case manufacturers should focus more on airflow and the physics of it all.
    Reply
  • ta152h
    They look like ass.

    When are case makers going to figure out that people do care about how the case looks, and they don't want it ugly?
    Reply
  • N.Broekhuijsen
    As happy as I was to hearing about the successor to the P180 Series, I don't like the new designs. I prefer the looks of the old ones, and the dual chamber design.
    Still Lovin' my mini P180, sexy as beast and looks like military grade stuff! This new stuff here, looks a bit softer... disappointing.
    Reply
  • lp231
    F*ck this!
    Post some booth babes! :P
    Reply
  • Onus
    Knowing some of Antec's other cases, these will no doubt be solid and well-made, whatever people may think of the designs.
    The PSUs look very good too, but a little too expensive.
    Reply
  • The Greater Good
    If I'm gonna spend 120 dollars on a PSU, it's gonna be a Seasonic.
    Reply
  • dgingeri
    I've had a lot of Antec cases, and the P180 was a favorite of mine, even if it was a little cramped. This P280 looks very nice and roomy. It looks like it might even be better than my HAF 932 that is currently my main case. (Yes, that's a Cooler Master case, not an Antec. I know that. I bought it because nothing Antec had would compare.) I might actually get one of those, maybe. The HAF 932 I have is nearly new, so I don't think that will need replacing for a little while longer.
    Reply
  • pocketdrummer
    I refuse to buy another Antec case. Their customer support is great, but the products are still flimsy. I bought a P180 a few years ago and had to replace both doors twice due to warping, and the front door 3 times because the slightest bump on the hinge causes it to shatter. Not to mention it was a pain to build in and there wasn't any space for cable management what-so-ever. Worst... case... ever.

    Now I'm rockin' a Lian-Li case. It's still not ideal, but it's leaps and bounds better than the P180.

    On another note, people need to stop negatively voting on comments because their opinion is different from your own. There were two legitimate comments on here that were hidden because they just weren't impressed. I, for one, am not impressed either. The PSUs are only bronze rated and stop at 750watts. Not enough for a solid high-end computer these days. The cases are just P180 variants with mild improvements... nothing ground breaking.

    A good case needs to be easy to build, spacious enough for long video cards, have a good cable management system, have positive air pressure w/ decent fans and filters, keep noise to a minimum, and MUST BE MADE OF SOLID MATERIALS ESPECIALLY IN FREQUENTLY STRESSED AREAS (no plastic joints, no warping materials, no weak glue, no flimsy buttons or switches, etc).
    Reply