Skip to main content

Gigabyte GP-P750GM Power Supply Review: Lacking the Explosive Character

Gigabyte's new GP-P750GM is less prone to fire, but still faces tough competition.

Gigabyte GP-P750GM
(Image: © Tom's Hardware)

Advanced Transient Response Tests

For details about our transient response testing, please click here.

In the real world, power supplies are always working with loads that change. It's of immense importance, then, for the PSU to keep its rails within the ATX specification's defined ranges. The smaller the deviations, the more stable your PC will be with less stress applied to its components. 

We should note that the ATX spec requires capacitive loading during the transient rests, but in our methodology, we also choose to apply a worst case scenario with no additional capacitance on the rails. 

Advanced Transient Response at 20% – 20ms

VoltageBeforeAfterChangePass/Fail
12V11.992V11.557V3.62%Pass
5V5.148V5.037V2.16%Pass
3.3V3.394V3.227V4.93%Pass
5VSB5.034V4.975V1.17%Pass

Advanced Transient Response at 20% – 10ms

VoltageBeforeAfterChangePass/Fail
12V11.993V11.440V4.61%Pass
5V5.148V5.023V2.44%Pass
3.3V3.394V3.231V4.81%Pass
5VSB5.034V4.962V1.43%Pass

Advanced Transient Response at 20% – 1ms

VoltageBeforeAfterChangePass/Fail
12V11.992V11.574V3.49%Pass
5V5.148V5.007V2.74%Pass
3.3V3.394V3.226V4.95%Pass
5VSB5.034V4.974V1.19%Pass

Advanced Transient Response at 50% – 20ms

VoltageBeforeAfterChangePass/Fail
12V11.978V11.806V1.43%Pass
5V5.127V5.017V2.14%Pass
3.3V3.369V3.196V5.14%Pass
5VSB5.020V4.958V1.24%Pass

Advanced Transient Response at 50% – 10ms

VoltageBeforeAfterChangePass/Fail
12V11.978V11.792V1.55%Pass
5V5.126V4.997V2.51%Pass
3.3V3.369V3.200V5.00%Pass
5VSB5.020V4.945V1.50%Pass

Advanced Transient Response at 50% – 1ms

VoltageBeforeAfterChangePass/Fail
12V11.978V11.760V1.82%Pass
5V5.126V5.034V1.79%Pass
3.3V3.368V3.212V4.63%Pass
5VSB5.020V4.950V1.39%Pass
Image 1 of 8

GP-P750GM

(Image credit: Tom's Hardware)
Image 2 of 8

GP-P750GM

(Image credit: Tom's Hardware)
Image 3 of 8

GP-P750GM

(Image credit: Tom's Hardware)
Image 4 of 8

GP-P750GM

(Image credit: Tom's Hardware)
Image 5 of 8

GP-P750GM

(Image credit: Tom's Hardware)
Image 6 of 8

GP-P750GM

(Image credit: Tom's Hardware)
Image 7 of 8

GP-P750GM

(Image credit: Tom's Hardware)
Image 8 of 8

GP-P750GM

(Image credit: Tom's Hardware)

Transient response is mediocre at 12V and 3.3V. The latter rail is saved from failing in these tests because of its high nominal voltage.

Turn-On Transient Tests

In the next set of tests, we measure the PSU's response in simpler transient load scenarios—during its power-on phase. Ideally, we don't want to see any voltage overshoots or spikes since those put a lot of stress on the DC-DC converters of installed components.

Image 1 of 3

GP-P750GM

(Image credit: Tom's Hardware)
Image 2 of 3

GP-P750GM

(Image credit: Tom's Hardware)
Image 3 of 3

GP-P750GM

(Image credit: Tom's Hardware)

The voltage dip in the last test, "PSU Off to Full 12V" can create problems with some mainboards. 

Power Supply Timing Tests

There are several signals generated by the power supply, which need to be within specified, by the ATX spec, ranges. If they are not, there can be compatibility issues with other system parts, especially mainboards. From year 2020, the PSU's Power-on time (T1) has to be lower than 150ms and the PWR_OK delay (T3) from 100 to 150ms, to be compatible with the Alternative Sleep Mode.

PSU Timings Table
T1 (Power-on time) & T3 (PWR_OK delay)
LoadT1T3
20%80ms264ms
100%78ms266ms
Image 1 of 4

GP-P750GM

(Image credit: Tom's Hardware)

PSU Timing Charts

Image 2 of 4

GP-P750GM

(Image credit: Tom's Hardware)
Image 3 of 4

GP-P750GM

(Image credit: Tom's Hardware)
Image 4 of 4

GP-P750GM

(Image credit: Tom's Hardware)

The PWR_OK delay is out of the 100-150ms region, so the PSU does not support the alternative sleep mode recommended by the ATX spec.

Ripple Measurements

Ripple represents the AC fluctuations (periodic) and noise (random) found in the PSU's DC rails. This phenomenon significantly decreases the capacitors' lifespan because it causes them to run hotter. A 10-degree Celsius increase can cut into a cap's useful life by 50%. Ripple also plays an important role in overall system stability, especially when overclocking is involved.

The ripple limits, according to the ATX specification, are 120mV (+12V) and 50mV (5V, 3.3V, and 5VSB).

Test12V5V3.3V5VSBPass/Fail
10% Load49.2 mV14.4 mV16.1 mV18.1 mVPass
20% Load27.4 mV17.9 mV16.5 mV17.8 mVPass
30% Load16.8 mV13.8 mV17.2 mV19.0 mVPass
40% Load17.5 mV14.6 mV16.4 mV21.7 mVPass
50% Load16.0 mV16.9 mV17.2 mV20.1 mVPass
60% Load19.2 mV17.5 mV18.3 mV20.5 mVPass
70% Load19.3 mV18.8 mV19.4 mV22.6 mVPass
80% Load20.4 mV21.5 mV21.1 mV26.0 mVPass
90% Load21.0 mV18.4 mV20.9 mV23.9 mVPass
100% Load29.1 mV22.8 mV24.6 mV25.0 mVPass
110% Load31.9 mV32.4 mV26.9 mV25.5 mVPass
Crossload 141.9 mV19.4 mV25.0 mV22.6 mVPass
Crossload 239.9 mV16.7 mV33.8 mV21.2 mVPass
Crossload 345.8 mV15.5 mV22.5 mV22.9 mVPass
Crossload 428.5 mV19.0 mV17.5 mV25.7 mVPass
Image 1 of 4

GP-P750GM

(Image credit: Tom's Hardware)
Image 2 of 4

GP-P750GM

(Image credit: Tom's Hardware)
Image 3 of 4

GP-P750GM

(Image credit: Tom's Hardware)
Image 4 of 4

GP-P750GM

(Image credit: Tom's Hardware)

Ripple suppression is satisfactory. 

Ripple At Full Load

Image 1 of 4

GP-P750GM

(Image credit: Tom's Hardware)
Image 2 of 4

GP-P750GM

(Image credit: Tom's Hardware)
Image 3 of 4

GP-P750GM

(Image credit: Tom's Hardware)
Image 4 of 4

GP-P750GM

(Image credit: Tom's Hardware)

Ripple At 110% Load

Image 1 of 4

GP-P750GM

(Image credit: Tom's Hardware)
Image 2 of 4

GP-P750GM

(Image credit: Tom's Hardware)
Image 3 of 4

GP-P750GM

(Image credit: Tom's Hardware)
Image 4 of 4

GP-P750GM

(Image credit: Tom's Hardware)

Ripple At Cross-Load 1

Image 1 of 4

GP-P750GM

(Image credit: Tom's Hardware)
Image 2 of 4

GP-P750GM

(Image credit: Tom's Hardware)
Image 3 of 4

GP-P750GM

(Image credit: Tom's Hardware)
Image 4 of 4

GP-P750GM

(Image credit: Tom's Hardware)

Ripple At Cross-Load 4

Image 1 of 4

GP-P750GM

(Image credit: Tom's Hardware)
Image 2 of 4

GP-P750GM

(Image credit: Tom's Hardware)
Image 3 of 4

GP-P750GM

(Image credit: Tom's Hardware)
Image 4 of 4

GP-P750GM

(Image credit: Tom's Hardware)

EMC Pre-Compliance Testing – Average & Quasi-Peak EMI Detector Results

Electromagnetic Compatibility (EMC) is the ability of a device to operate properly in its environment without disrupting the proper operation of other nearby devices.

Electromagnetic Interference (EMI) stands for the electromagnetic energy a device emits, and it can cause problems in other nearby devices if too high. For example, it can be the cause of increased static noise in your headphones or/and speakers.

(Image credit: Tom's Hardware)

There are several EMI spikes, with both the AVG and Peak EMI detectors. The spikes are fewer with the latter detector. 

MORE: Best Power Supplies

MORE: How We Test Power Supplies

MORE: All Power Supply Content

Aris Mpitziopoulos
Aris Mpitziopoulos

Aris Mpitziopoulos is a Contributing Editor at Tom's Hardware US, covering PSUs.

  • helper800
    The title should have been; Gigabyte PSU Review: Lacking any Explosive Features, Good or Bad.
    Reply
  • watzupken
    I don't know man. Once beaten, twice shy. Even with the fixes, this is not a PSU that I will use or recommend. To me, the worst part is how Gigabyte tried to shrug off responsibility for the explosive PSU that are potential fire hazard, and put off fixing the shortcomings of the PSU for almost a year.
    Reply