Qnap TS-559 Pro: Do More Drives In Your NAS Mean More Speed?

Features
By Marcel Binder
published

We know that adding drives to a RAID array can help improve performance. But does adding storage to a NAS device really help push throughput higher? We put four-bay and five-bay units from Qnap up against each other and benchmark their transfer rates.

Conclusion

With the TS-459 Pro and TS-559 Pro, Qnap offers two NAS devices in the upper class of the enthusiast segment that are a attractive when it comes to build quality and equipment, as well as features. We are not surprised to find that the suggested target audience includes small and medium businesses, too. The range of products is nice and broad, as Qnap’s portfolio stretches from two-drive NAS models to heavyweight eight-drive models for business applications.

For enthusiasts and ambitious home users, the four- and five-drive bay NAS models are probably the most interesting ones. At around $900 and $1100, they are far from affordable for home users, but attractive for small businesses and enthusiasts on a larger budget. However, our question is whether you should spring for the model with four or five drive bays?

If you were speculating that the extra hard drive in the TS-559 Pro would bring some extra speed to its RAID array compared to the four-bay version, prepare to be disappointed. Our benchmarks only show performance differences in the RAID 5 degraded mode and RAID 6 mode.

But there are arguments for the TS-559 Pro other than faster transfer rates. It obviously has a higher maximum storage capacity and allows for more flexibility when it comes to the configuration of RAID modes. Depending on the requirements, the TS-559 Pro could be set to run two hard drives in RAID 1 mode, while operating the remaining three hard drives in a RAID 5 array. Security-conscious users should be particularly attracted by the possibility of running four drives as a RAID 5 array, ensuring a high storage capacity, and use the additional available hard drive as a hot spare drive or drive for temporary data. Speed is not the highest priority in that case, anyway.

Marcel Binder
Marcel Binder
31 Comments Comment from the forums
  • thomaseron
    "We put four-bay and five-bad units..."
    Haha! ;-)


    EDIT: They have corrected it now... :-)
    Reply
  • Zoidman
    I set a TS-459 up at my work, and that machine is a piece of beauty! It runs a copy of linux on it which is root accessible by SSH thus unlocking all the potentials you could ever want! It adds a huge amount of value to the devices in my opinion and would recommend it to a business looking for a basic backup system.
    Reply
  • Reynod
    I would need to sell a kidney.

    /ponders
    Reply
  • ProDigit10
    Who would want to pay that for a nas server?
    Just purchase a micro atx board + case + Atom N550/D525 and 2GB of ram, and install 2 or 4 harddrives in RAID.
    It'll cost you less than $400!

    5 drives and up is indeed harder to get, but definitely NOT worth trice the price!

    Besides, the Atom is a very small CPU which would bottleneck when 2 or 3 drives are copy/moving data. I don't think it's even wise from performance standpoint of view to buy any Atom NAS server with more than 3 or 4 drives!

    comment made before reading article.
    Reply
  • Agges
    Supporting ProDigit10's sentiment..

    How about adding a 'building your own NAS/server' guide, including testing the sweet-spot for price/performance for various set-ups..?
    Reply
  • mjw
    It looks like the network may be a bottleneck in a number of your tests. It would be interesting to see if the performance increases when the dual gigabit NICs are run in teaming mode.
    Reply
  • KentC
    I bought an Acer Home Server with 4 hot swap drive bays and one drive bay with a 1tb drive with the server OS for $350. It looks like these units provide less and cost almost three times as much. Why are they so expensive? What does 3x the cost buy me?
    Reply
  • noblerabbit
    I just shove 5 harddrives in my PC for my storage needs.
    Reply
  • joex444
    I'm with mjw here. If the highest number you ever achieved is 116MB/s you're limited by GbE rather than anything else. When a 2 drive RAID1 performs the same as a 5 drive RAID5 you have some other problem.

    I run an external 8 bay unit, all drives filled with 2x250GB drives for OS and 6x750GB drives for RAID5. The biggest problem I have in terms of getting an idea of the true transfer rates capable is the fact that the RAID5 can write faster than the other array reads. And copying from an array to itself always has issues. So in real-world apps, my write speeds are limited by the read speed of other devices. The only logical way to untangle the two is to run a separate 6 drive RAID5 array, but I'm out of PCIe 8x slots to do so (as well as money).
    Reply
  • mikem_90
    Part of what you pay for is the software development for all the features they give out of the box. Sure you could build your own, but it might not be as compact while offering hot swap and have an well designed interface with the well integrated features.

    These systems offer some very nice features I don't mind paying for.

    Keep in mind that this is the corporate version, it has a much beefier CPU than the cheaper ones that cost a few hundred dollars less. They don't offer the same performance, but not everyone needs to use volume based encryption and send the files back and forth over SSL encrypted links.
    Reply