High Speed Burning via USB2.0 - Waitec FrisbyII

Test Setup And Benchmarks

Our test setup used a PC configured as follows:

Test System
Processor Intel Pentium4 1.9 GHz 256 kB L2 Cache
Motherboard Intel 845 GBV
Memory 256 MB DDR400, CL2.5 Kingmax
USB2.0 Controller NEC uPD720100A
Graphics Card NVIDIA GeForce3 Ti 500 64 MB
Harddisk Maxtor 5T040H4 (40 GB)
CD-R/RW-Drives ASUS S520, TDK CRW241040
Network Card D-LinkDFE-530TX PCI 100 MBit
OS Windows XP Pro 5.01.2600 SP1
Benchmarks and Software
Burning Software Nero Burning ROM 5.5.9.9
Packet Writing SW Ahead InCD 3.37.0
Tools Nero CD Speed 1.00
Clony XXL 2.0.0.6
CloneCD 4.0.1.10.
DAE Exact Audio Copy 0.9 beta4
Drivers and Settings
Graphics Driver NVIDIA 3.0.8.2
IDE Driver Intel 82801DB ICH4 4.0.1001.0
ASPI Driver Adaptec 4.71, Ahead 2.0.1
DirectX Version 8.1
Resolution 1280x1024, 32 Bit, 85 Hz Refresh

A USB2.0 adapter (PCI expansion card) was used to connect the CD writer.

Create a new thread in the US Reviews comments forum about this subject
This thread is closed for comments
No comments yet
    Your comment