Small Water Versus Big Air, Part 3: Cooling Questions Answered
Features
published
Rosewill FORT120 Fan Configurations
Because the high-speed fan used in other cooler tests was the FORT120's base fan, a different method was chosen to add a second test with this unit. Corsair’s configuration gave us an idea.
After closing the above system and testing it with fans in the traditional orientation, we decided to find out what kind of advantage reversing the exhaust fan and blowing cool air into the sink might offer to a more conventional heatsink/fan combination. Because the FORT120 sink is offset to one side, facing it to blow in the opposite direction required turning it 180° for this second alternative test.
Stay On the Cutting Edge: Get the Tom's Hardware Newsletter
Get Tom's Hardware's best news and in-depth reviews, straight to your inbox.
Current page: Rosewill FORT120 Fan Configurations
Prev Page Corsair H50 Fan Configurations Next Page Test ResultsThomas Soderstrom is a Senior Staff Editor at Tom's Hardware US. He tests and reviews cases, cooling, memory and motherboards.
TOPICS
69 Comments
Comment from the forums
-
Annisman Ditched my Domino A.L.C. for a Xigmatek Thor's Hammer with 2 X Scythe fans. Strapped it on a Core i7 920, bumped it to 4.0Ghz and never looked back.Reply -
burnley14 Interesting. This is good to know for a future build, since cheap water cooling was always a temptation for me.Reply -
tkgclimb I was looking at water, then I decided if I really want to do this I'm going to have to spend at least 200 if i want a good, effective, upgradeable system. So I'm going to get the megahalem or the thermalright TRUE extreme. and stay with some sick air.Reply -
rpmrush Air is still a better value unless you value noise or lack there of.Reply
Water offers lower noise @ a slightly less extreme overclock, but who runs 4.0Ghz plus everyday. -
apache_lives still using my old thermaltake big typhoon with a few mods - sealed the gaps on the sides for more air pressure and using a 12cm "thick" fan from a dell tower (crazy) and the same type fan to extract air - works a treat :DReply
kinda proves that when your going water cooling, do it PROPERLY not a pre made kit
if i was to do water cooling, i would go all the way with a modded car radiator, drum for a water sump and a few powerful decent sized pumps to start off with to keep everything sweet, none of this "barely better then stock" bs. -
The corsair h50 is NOT a water cooling solution. Not even close. At best, call it an "optimized" air cooler. The only situation where you would want one is if you need to install a cooler in a tight space. Otherwise, it's higher cost really ruins any value it has.Reply
-
The_Blood_Raven Get a Swiftech H220 in there and it will beat the air coolers pretty well, besides that there are no out of the box water cooling setups that can actually beat high end air coolers by anything meaningful.Reply
Good article though, your best articles are when you take the time to answer these odd questions that are commonly asked by the enthusiast. -
Onus As many times as I see bottom-PSU cases like the Antec 300 recommended in builds in the Forum, the lingering question for me becomes, "Suppose I do have a bottom-psu top-panel-fan case. Would that make a difference?" Or, is there ANY situation where the cooling performance of this type of liquid cooler is actually superior to a big air cooler?Reply -
skora Thanks for listening to the feedback and doing follow ups like this TS. Really gives the community a reason to become involved knowing our unanswered questions get addressed.Reply