Overall, enthusiasts shopping for a feature packed, attractive, builder-friendly case for an exceptionally quiet system build, will no doubt find the Corsair Obsidian 500D a viable option. Overclockers and performance enthusiast will need to factor in the cost of added fans and/or water cooling components to the price of their system build to compensate for lacking thermal performance. In the end, we believe this chassis would be a much better value in the $120 range.
Pros
+
Very Well Designed
Hinged Tempered Glass Side Panels
Great Fit and Finish
Great Looks
Cons
-
Price, for some
Single 120mm Intake Fan
Lacking Cooling Performance
Why you can trust Tom's Hardware
Our expert reviewers spend hours testing and comparing products and services so you can choose the best for you. Find out more about how we test.
Features & Specifications
Corsair hardly needs an introduction here: The company is a key provider of enthusiast-grade components over the past two decades, with a major following among the PC performance community. Today, the company is rolling out the latest addition to its Obsidian line of premium computer chassis.
Billed as a chassis that makes it "easier than ever to build your dream PC," the Obsidian 500D premium ATX mid-tower features aluminum and tempered-glass panels attached to a steel frame. This chassis measures 508x233x502mm (HWD), weighs 24.6 lbs, and is painted black inside and out.
The entire top of the chassis is covered by a raised aluminum panel that features a row of triangular ventilation holes down the center. Underneath the top panel, you will find mounting locations for two 120mm or two 140mm fans. Corsair also includes a large plastic filter in this location that removes from the side; the filter edges are magnetic, and it's washable. The top panel is held in place by thumbscrews that thread into it from the inside of the chassis.
Like so many cases these days, the 500D is not equipped with an external 5.25" drive bay. That may, or may not, be a deal-breaker for some. The front of the chassis is covered by a thick plastic panel with a thin brushed-aluminum insert designed to match the look of the aluminum top panel. The outer edges of the front panel are curved to allow air to pass into the chassis through the magnetic filter that covers the three fan-mounting locations behind the front face. The upper edge of the front panel is home to a power button, two USB 3.0 ports, a single USB 3.1 Type C port, headphone and microphone jacks, a hard drive activity LED, and a reset switch.
Around back, you'll find the standard motherboard I/O area, seven expansion-card slots (plus two card slots for vertical-mounted GPUs), an opening for a bottom-mounted power supply unit, and an exhaust-fan mounting location that supports 120mm fans. The exhaust-fan mounting location features slotted screw holes that lets you adjust the position of the fan to fine-tune airflow or make room for system components. The bottom of the chassis sports a filtered hole for power supply ventilation and four large rubber-coated feet that elevate the case approximately a half inch off the ground.
The tempered-glass and aluminum side panels are hinged in the rear and employ a magnetic latching system that grants instant access to the inside of the chassis. The tempered glass is darkly tinted, but it's still transparent enough for you to see your system hardware. Lifting the side panels off the chassis requires the removal of a single screw on the top hinge on either side. Once the screw is removed, the side panel can be safely removed from the chassis.
The 500D is equipped with large removable nylon filters that cover every fan-mounting location, including the power supply. The fan filters in the top and front of the chassis slide in and out for easy maintenance and are held in place by magnets. The power supply filter slides out from the rear and requires moving your entire system to access it for maintenance and cleaning.
Stay On the Cutting Edge: Get the Tom's Hardware Newsletter
Get Tom's Hardware's best news and in-depth reviews, straight to your inbox.
Although the "look" of a case is subjective, we believe most people will find the look and design of this chassis suitable for a variety of different environments from business to gaming.
I don't understand why everyone blows smoke up Corsair's butt when they release anything. Most of it is good but this is categorically not. It's lacking a ton of features, opting for less is more when you can have less while having more as an option. This case is ugly as sin when it's not a glamor shot, about the only honest thing about this review are the pictures that highlight its real world ugliness.
Worst of all, this is a $80, tops, case being sold for $150... Yeah. Time to leave this site if this mindlessness continues...
A different opinion here : I do like the 500D, but I will agree with you that the 250 buck all tempered glass version looks ugly. This 500D got the perfect mix of glass and metal. Doesn't look too gaudy and yet has some flare.
You won't find brushed aluminium inserts and panels along with custom loop friendly design in an 80 buck case. Most 80 buck cases won't even have the clearance for push pull front rad with a full length gpu. Not to mention easy rad mountings and dust filters all around. Maybe 150 is a bit steep, expect that to come down to 120 in a month or two.
Just looking at this case says cooling isn't up to snuff...
■ The fans provided could have been omitted in the first place. Any "premium" user will pick his own fans anyway.■ The ground clearance isn't enough to provide the PSU with any significant amount of air.■ The two slots in the front are not enough to provide intake air for the front fans. (Unless running a low power computer.)■ Is there any cooling at all for the HDDs?■ PSU dust filter removable only rearwards...This case seems best suited for a quiet low power rig pulling <100W total peak while relying on external storage.
Then a couple of 300 rpm fans will do nicely!
I would have liked to see bulky cases with no windows and soundproofed. Maybe one placed in a muffler like a maze with sound dampening so you get no noise coming off it for clear and crisp immersion during vr or intense horror moments with no background fan noise
