Inland Performance Plus M.2 NVMe SSD Review: Fast and Cool

Inland’s Performance Plus is a high-performance PCIe 4.0 x4 M.2 NVMe SSD that rivals the best SSDs you can buy, but at a cheaper price point. Plus, it comes with a huge heat sink to keep this SSD cool under intensive workloads. You might not recognize the Inland brand, but it's been a staple at Micro Center for years, and is available via Amazon as well. 

Inland’s Performance Plus is one of a few of the company’s recent speedy SSDs we have slated for review. Many (if not all) of Inland’s SSDs look to be powered by Phison-branded SSD controllers, which gives us an idea of what to expect when it comes to performance and reliability. While the brand isn’t as large as say Samsung or Crucial, with the help of Phison, the company is able to remaining surprisingly competitive in the storage arena, against many much-larger rivals.

Hardware-wise, Inland’s performance Plus is similar in design to that of the Gigabyte Aorus Gen4 7000s, Corsair MP600 Pro, and Sabrent Rocket 4 Plus. It leverages the same E18 NVMe SSD controller and Micron’s 96L TLC flash as these alternatives, along with a sleek heatsink, but it undercuts them in price in most cases. The Inland Performance Plus makes for a solid value for those on the hunt for fast Gen4 SSD.

Specifications

Inland offers the Performance Plus in 1TB and 2TB capacities, priced at $190 and $400, respectively. In terms of warranty coverage, Inland backs the Performance Plus with a five-year warranty or up to 700TB of writes per 1TB in capacity, whichever comes first.    

Each capacity can dish out up to 7 GBps in read performance, but both differ in write potential. The 1TB model can write at up to 5.5 GBps, while the roomier 2TB model can sustain writes at up to 6.85 GBps thanks to having double the number of the NAND dies. Additionally, random read performance scales much higher on the 2TB than the 1TB model. The 1TB Performance Plus is rated to deliver up to 350,000/700,000 random read/write IOPS while the 2TB model can manage up to 650,000/700,000 random read/write IOPS.

A Closer Look

Image 1 of 4

Inland includes a well-designed heatsink, similar to that of the Corsair MP600 Pro, but with a few more cuts to add surface area for taming the heat under sustained workloads. However, measuring 14.5 x 23 x 70mm, Inland’s Performance Plus is very thick and can interfere with GPU placement, depending on the M.2 slot you attempt to install it in. If it gets in the way or you just want to use your motherboard’s heat sink, it is easy to remove, though.

Image 1 of 4

At the heart of the Performance Plus is a Phison PS5018-E18 PCIe 4.0 x4 NVMe 1.4 SSD controller. Along with features such as S.M.A.R.T. data reporting, secure erase capability, and TRIM, it also features ASPM and APST support for low power consumption at idle. 

Unlike Phison’s previous-generation E16, the E18 is built from the ground up tp offer greater performance capability for PCIe 4.0 drives. It leverages a tri-core primary Arm Cortex R5 architecture, along with a dual-core co-processor, which results in very fast sustained write speeds. Furthermore, there are two 8Gb SK hynix DDR4 DRAM ICs on our 2TB sample, in order to accelerate access to the logical to physical mapping tables, ensuring responsive reads.

As for the bulk storage, we find eight packages of Micron’s 96L TLC. There are 32 dies in total on our 2TB sample, each 512Gb in density. This flash is not quite as fast as Micron’s recently tested 176L TLC, but with it operating at 1200 MTps over the controller’s eight NAND channels, it’s fast enough to keep up with the likes of the best in many cases.  

MORE: Best SSDs

MORE: How We Test HDDs And SSDs

MORE: All SSD Content