P67 Motherboard Roundup: Nine $150-200 Boards

By Thomas Soderstrom
published

Improved per-clock performance and higher achievable frequencies are sure to put Intel’s latest K-Series CPUs on top of many builders’ whish lists, but they’ll still need a new socket to put it in. We test nine enthusiast-oriented LGA-1155 motherboards.

Benchmark Results: Just Cause 2

Biostar’s lead is consistent across multiple resolutions at our medium settings for Just Cause 2. Jetway takes third place, even without a functioning Turbo Boost multiplier.

The HI08 slides down a few positions at Just Cause 2’s highest settings, while Biostar retains its lead.

Thomas Soderstrom
Thomas Soderstrom
Thomas Soderstrom is a Senior Staff Editor at Tom's Hardware US. He tests and reviews cases, cooling, memory and motherboards.
95 Comments Comment from the forums
  • Tamz_msc
    Nice review.That ASUS came up with the highest CPU overclock wasn't surprising.
    Reply
  • reprotected
    I thought that the ECS looked pretty sick, and it did perform alright. But unfortunately, it wasn't the best.
    Reply
  • rantsky
    You guys rock! Thanks for the review!

    I'm just missing benchmarks like SATA/USB speeds etc. Please Tom's get those numbers for us!
    Reply
  • Tamz_msc
    When will we see an overclocking article on these CPUs?
    Reply
  • rmse17
    Thanks for the prompt review of the boards! I would like to see any differences in quality of audio and networking components. For example, what chipsets are used for Audio in each board, how that affects sound quality. Same thing for network, which chipset is used for networking, and bandwidth benchmarks. If you guys make part 2 to the review, it would be nice to see those features, as I think that would be one more way these boards would differentiate themselves.
    Reply
  • VVV850
    Would have been good to know the bios version for the tested motherboards. Sorry if I double posted.
    Reply
  • flabbergasted
    I'm going for the ASrock because I can use my socket 775 aftermarket cooler with it.
    Reply
  • VVV850
    I was wrong. The BIOS version is posted.
    Reply
  • stasdm
    Do not see any board worth spending money on.

    1. SLI "support". Do not understand why end-user has to pay for mythical SLI "sertification" (all latest Intel chips support SLI by definition) and a SLI bridge coming with the board (at least 75% of end users would never need one). The bridge should come with NVIDIA cards (same as with AMD ones). Also, in x8/x8 PCIe configuration nearly all NVIDIA cards (exept for low-end ones) will loose at least 12% productivity - with top cards that is about $100 spent for nothing (AMD cards would not see that difference). So, If those cards are coming as SLI-"sertified" they have to be, in the worst case, equipped by NVIDIA NF200 chip (though, I would not recommend to by cards with this PCIe v.1.1 bridge). As even NVIDIA GF110 cards really need less than 1GB/s bandwidth (all other NVIDIA and AMD - less than 0.8GB/s)and secondary cards in SLI/CrossFire use no more than 1/4 of that, a normal PCIe v.2.0 switch (costing less than thrown away with x8/x8 SLI money) will nicely support three "Graphics only" x16 slots, fully-functional x8 slot and will provide bandwidth enough to support one PCIe v.2.0 x4 (or 4 x x1) slot(s)/device(s).

    2. Do not understand the author euphoria of mass use of Marvell "SATA 6G" chips. The PCIe x1 chip might not be "SATA 6G" by definision, as it woud newer be able to provide more than 470GB/s (which is far from the standard 600GB/s) - so, I'd recommend to denote tham as 3G+ or 6G-. As it is shown in the upper section, there is enough bandwidth for real 6G solution (PCIe x8 LSISAS 2008 or x4 LSISAS 2004). Yes, will be a bit more expensive, but do not see the reason to have a palliative solutions on $200+ mobos.

    Reply
  • I was hoping that the new Asus Sabertooth P67 would be included. Its new design really is leaving people wondering if the change is as good as they claim.
    Reply