Skip to main content

Unofficial PS5 Remote Play Comes to Raspberry Pi

A Raspberry Pi 4 and a DualSense controller side by side
(Image credit: Evoneg Tech)

Being able to play your PlayStation 4 and 5 games all around your house via Remote Play streaming is a neat feature, but the small number of officially supported devices means you’re stuck with Windows, macOS, iOS, Android, or another PlayStation. Enterprising coders determined to get an open-source Remote Play client running on a wider selection of devices have had it happily streaming on Linux for a while, and the humble Raspberry Pi, with its Debian-based OS, is the latest target, as shown in this video from Philippines-based Evoneg Tech. 

To get it going you’ll need a Raspberry Pi 4, and a fork of the Chiaki streaming app from Github. Remote Play needs to be activated on your PS5, and you should pair a Bluetooth controller with your Pi (a DualShock will work fine, but make sure it’s not still paired with, and within range of, your console).

You’ll need to install a few dependencies first, then build the app on your Pi, so don’t jump in unless you’re comfortable with typing console commands. There’s a full guide to Pi installation on the project’s Github wiki. You’ll also need your PSN account ID, which can be extracted by following the steps here.

It works on both wired and wireless connections, and with a good connection you’ll get a 1080p/60fps connection. The devs say it also works on the PS4 Pro, but there’s no mention of the original PS4 console. Nintendo Switch owners should note that there’s a build of the app for their console too, but it has some very specific installation instructions.