X48 Motherboard Comparison

BIOS And Overclocking

Swipe to scroll horizontally
BIOS Frequency and Voltage settings (for overclocking)
FSB Frequency100 - 700 MHz (1 MHz)
Clock Multiplier AdjustmentYes
DRAM FrequencyFSB x 1.0, 1.2, 1.25, 1.33, 1.5, 1.6, 1.66, 2.0
PCIe Clock90 - 150 MHz (1 MHz)
CPU Vcore0.50000- 1.6000 - 2.35 Volts (0.00625/0.05 Volts)
CPU FSB Voltage1.20 - 1.55 Volts (0.05 Volts)
Northbridge (MCH)1.25 - 2.025 Volts (0.15 Volts)
Southbridge (ICH)None
DRAM Voltage1.50 - 3.05 Volts (0.05 Volts)
CAS Latency Range
tCAS: 4-11; tRCD: 1-15; tRP: 1-15; tRAS: 1-63

Most of the BIOS ranges are the same for the X48T-DQ6 as they were for the X48-DQ6. Further details can be found in our X48-DQ6 BIOS description.

Though the X48T-DQ6 memory voltage range is different from that of the X48-DQ6, it appears the same since Gigabyte uses "over stock" settings rather than showing actual values. While the breadth of adjustments is identical, the base voltage for DDR3 is 1.50 volts rather than the 1.80 volts of DDR2.

Our Core 2 Duo E6850 reached 4014 MHz clock at its stock 9x multiplier and 1.60 volts core. Dropping the CPU core multiplier to 6x allowed the X48T-DQ6 to reach 540 MHz FSB. FSB and MCH voltage were set to +0.30 V and +0.35 V respectively.

Thomas Soderstrom
Thomas Soderstrom is a Senior Staff Editor at Tom's Hardware US. He tests and reviews cases, cooling, memory and motherboards.
  • Help please.Can this board be configured with the first two (SATA) HDs mirrored and the other drives JBOD? Thank you in advance.
    Reply
  • oblivionspell
    Great review, very detailed and informative. But I must say that either you were lucky that your X38 P5E3 Deluxe came with a better-than-average chipset or that I wasn't so lucky and got a malfunctioning one.

    I have an Asus Maximus Formula which is, as you know, the Republic of Gamer's solution for the X38 and recently bought a Patriot Extreme Performance 1150mhz PC2-9600. Whenever I try anything above 1020mhz for the RAM my PC reboots; the higher it is the less time it takes to do it. At 1020mhz it'll only reboot if I run something more demanding like 3dMark06 or any new game, at 1100mhz it'll barely show the Windows loading screen then reboot, above 1120mhz it'll not even load windows and freeze. But in every case it boots up fine.

    The Asus forums are full of users who can't get stability in any way with >=1066mhz ram on X38 boards. A selected few have come to accomplish it however, which leads me to think those were the lucky ones who got the good shipment, like you. The Patriot forums are the same, X38 users can't get their system stable with RAMS over 1066 or not even that.

    Maybe that X48 "official" support is something to consider, it might be the fix to the X38 we users are looking for. Even if it's only to make sure it'll run RAMs at >=1066mhz, it's good enough already.
    Reply
  • oblivionspell - Have you tried manually setting your RAM voltage to the correct value for the performance setting(s)?

    I had to do this on my Asus Crosshair, even though EPP is supposed to take care of it for you. Without manually setting the voltage, I had memory corruption and crashes, but could use the non-EPP mode. With the voltage bumped to the correct 2.1V,
    the EPP modes work perfectly.
    Reply
  • Crashman
    oblivionspellGreat review, very detailed and informative. But I must say that either you were lucky that your X38 P5E3 Deluxe came with a better-than-average chipset or that I wasn't so lucky and got a malfunctioning one.I have an Asus Maximus Formula which is, as you know, the Republic of Gamer's solution for the X38 and recently bought a Patriot Extreme Performance 1150mhz PC2-9600. Whenever I try anything above 1020mhz for the RAM my PC reboots; the higher it is the less time it takes to do it. At 1020mhz it'll only reboot if I run something more demanding like 3dMark06 or any new game, at 1100mhz it'll barely show the Windows loading screen then reboot, above 1120mhz it'll not even load windows and freeze. But in every case it boots up fine.The Asus forums are full of users who can't get stability in any way with >=1066mhz ram on X38 boards. A selected few have come to accomplish it however, which leads me to think those were the lucky ones who got the good shipment, like you. The Patriot forums are the same, X38 users can't get their system stable with RAMS over 1066 or not even that.Maybe that X48 "official" support is something to consider, it might be the fix to the X38 we users are looking for. Even if it's only to make sure it'll run RAMs at >=1066mhz, it's good enough already.
    It's just a matter of having the right RAM and using the correct timings and voltage. All X38 and X48 motherboards that support DDR2 memory can run DDR2-1066 speeds with stability, so long as the RAM is set up right in BIOS.
    Reply
  • "Inside, users will find a GUI based on the Smart Common Input Method (SCIM) platform."

    This is not accurate. SCIM is an "input method" -- a scheme for entering internationalized text. Not sure what the GUI is really based on. GTK2, maybe?
    Reply
  • Crashman
    "Inside, users will find a GUI based on the Smart Common Input Method (SCIM) platform."

    This is not accurate. SCIM is an "input method" -- a scheme for entering internationalized text. Not sure what the GUI is really based on. GTK2, maybe?

    I see your point, but that's the same arguement as "Windows 98SE is a GUI based on DOS". Which is innacurate only in wording. It would be better to say "Windows 98SE is a GUI for DOS".

    So, you'd be happier to read "Users will find a GUI for the Smart Common Input Method (SCIM) platform" correct?
    Reply
  • chill70
    It's not only the wording. SCIM is not an operating system, so even your example is not analogous (won't even mention that DOS and Windows are separate operating systems with distinct kernels, etc).

    This statement is as correct as saying Vista has a GUI based on a 105-key keyboard.

    SCIM is an input method platform independent on the GUI. GTK GUI is an widget toolkit, independent on SCIM (although they *may* used each other). Neither is "based" on the other.

    If you want to emphasize that the Express Gate supports users of many different languages and nationalities you can mention that the GUI USES SCIM.
    Reply