The 2.5" vs. 3.5" RAID Challenge

Features
By published

Benchmark Results, Continued

Patrick Schmid
Patrick Schmid
Editor-in-Chief (2005-2006)

Patrick Schmid was the editor-in-chief for Tom's Hardware from 2005 to 2006. He wrote numerous articles on a wide range of hardware topics, including storage, CPUs, and system builds.

2 Comments Comment from the forums
  • If you look closely you will see that this review compared 5400rpm 2.5" drives with 7200rpm 3.5" drives.

    Which makes it completely useless and flawed. I seriously can't believe Tom's did that. Maybe if there had been 5400rpm 3.5" drives included, some useful information could be gleaned from the tests.

    This entire article should be deleted just to save face, if not disk space. This article's very existence makes me embarrassed for Tom's Hardware.
    Reply
  • Agree
    This is ridiculous
    the outside speed of the platter !!
    I cannot believe it .. you wait one turn never mind where your data are located and at 7200rpm your platter may be 1 meter in diameter it is not going to change anything it will stl be one rouind trip
    You will wait one turn ( 1/7200th of a second )
    It ain't go faster nor slower mechanically
    The heads are another story

    Reply