Skip to main content

Thermaltake's Trio of CPU Coolers Tame The Toughest Of CPUs

ToughAir 510
ToughAir 510 (Image credit: Thermaltake)

Thermaltake has introduced the new ToughAir series of CPU air coolers for both Intel and AMD platforms. The ToughAir 110 features a horizontal form factor, while the ToughAir 310 and ToughAir 510 adhere to a more traditional vertical tower design.

Regardless of the presentation, Thermaltake implements a four copper heat pipe arrangement with the ToughAir CPU coolers. Each heat pipe, which is 6mm in diameter, makes direct contact with the processor and transfers the heat towards the aluminum heatsink, which flaunts an optimized layout for the best heat dissipation.

Thermaltake rates the ToughAir 110 (137.7 x 123.6 x 114.1mm) with a cooling capacity up to 140W. The ToughAir 310 (123.6 x 71.7 x 159.5mm), on the other hand, is good for up to 170W, while the ToughAir 510 (123.6 x 98.8 x 159.5mm) that relies on an additional fan can cool up to 180W. 

The Ryzen 9 5950X and Core i9-10900K are AMD and Intel's current mainstream flagship processor. The first sports a 105W TDP, while the latter carries a 125W TDP so, Thermaltake's ToughAir CPU coolers should have no problem handling either chip.

Image 1 of 3

ToughAir 110

ToughAir 110 (Image credit: Thermaltake)
Image 2 of 3

ToughAir 510

ToughAir 510 (Image credit: Thermaltake)
Image 3 of 3

ToughAir 310

ToughAir 310 (Image credit: Thermaltake)

The ToughAir CPU coolers employ the ToughFan 12 cooling fan. The fan, which measures 120 x 120 x 25mm, comes equipped with nine liquid crystal polymer (LCP) fan blades and Thermaltake's second-gen hydraulic bearing. The ToughFan spins between 500 RPM and 2,000 RPM. You can control its speed thanks to the standard 4-pin fan connector.

At its highest velocity, the ToughFan 12 delivers an airflow and air pressure up to 58.35 CFM and 2.41 mmH2O, respectively. According to Thermaltake, the fan has a maximum acoustical noise level of 23.6 dBA and a lifetime of up to 40,000 hours (around four and a half years).

Socket compatibility includes Intel's LGA1200, LGA115x, and AMD's AM4, FM2, FM1, AM3, AM2, and their corresponding derivations.

If you're interested in securing ToughAir's services, the CPU coolers will hit the U.S. and Canadian markets in the first quarter of this year. The ToughAir 110 will retail for $34.99, the ToughAir 310 for $39.99, and the ToughAir 510 for $49.99. Thermaltake backs the ToughAir CPU coolers with a limited two-year warranty.           

  • Phaaze88
    :mdr:
    I already saw this and more, over on TPU. Blatant rip-offs, but then again, hardly anything is original these days...

    A name change is in order nonetheless. Thermalfake has already been done, so - ladies and gentlemen, I present to you...
    Copytake.
    Reply
  • Darkbreeze
    Isn't it strange how suddenly Thermalfake's coolers look a LOT like Scythe's. Identical fan color scheme. Almost as if they..........(intake of breath)........copied it.
    Reply
  • rubix_1011
    There are plenty of TT cases and other components which are direct facsimiles of others.

    https://www.guru3d.com/news-story/thermaltake-accused-of-plagiarizing-designs.html
    Reply
  • Phaaze88
    The reason they get away with it is because they sell their crap cheaper; consumers can't resist that...
    Reply
  • 2Be_or_Not2Be
    Phaaze88 said:
    The reason they get away with it is because they sell their crap cheaper; consumers can't resist that...

    Hey, if they can get close to Noctua performance at lower prices, that's good for consumers! Have to wait to see the tests, though. Often the near-copies don't measure up to the original.

    That 510 model should at least have been a dual-stack model, rather than just adding another fan. Another 10W cooling isn't going to matter that much; another 30-50W would have better for such a relatively big model number jump. Seems like they could have named the 510 model "312" (310 model but with "2" fans) instead.
    Reply
  • Phaaze88
    2Be_or_Not2Be said:
    Hey, if they can get close to Noctua performance at lower prices, that's good for consumers! Have to wait to see the tests, though. Often the near-copies don't measure up to the original.
    To each their own... everyone's perception of value is different.
    I'm fine with paying the premium if it means I'm not replacing the product as often. I've got enough Noctua fans - due to numerous experiments - that I won't have to buy new fans for years...

    But I guess none of it really matters as long as one is earning money.


    That was real petty of Thermaltake what they did with Phanteks and their Enthoo Luxe 2 - now Enthoo 719.
    Reply
  • Darkbreeze
    Everything Thermalfake does is petty. They have no ability to create anything original. Everything they sell steals or borrows from somebody else's original designs and plans. Except maybe the Level 20, or whatever it is, garbage cases that are wall mountable open air, and those suck completely anyhow so it's not surprising that it was something they came up with on their own.

    One of the few companies I dislike more than Cooler Master. Probably even more than MSI.
    Reply
  • Phaaze88
    Darkbreeze said:
    garbage cases that are wall mountable open air, and those suck completely anyhow
    How so, besides the dust part?
    Reply
  • Darkbreeze
    I'd have to dig out the specific threads to remember the exact problems with them, but there are enough to make it a hard pass in my eyes. I'll see if I can find them and I'll PM them to you for a good read.
    Reply
  • Phaaze88
    Thanks!
    Reply