Asus teams up with HiFiMan for planar magnetic ROG Kithara gaming headset — extremely comfortable and excellent audio, for a price

Asus ROG Kithara
(Image credit: Tom's Hardware)

I did not have a partnership with Asus’ gaming arm and planar magnetic pioneers HiFiMan on my CES 2026 bingo card, but the ROG Kithara open-back planar magnetic gaming headset has just been announced. And after spending a few days with the fancy gaming cans before heading to Las Vegas, I can confirm they sound amazing – especially when I broke out a few CDs rather than relying on streaming. And at least to my head, they are extremely comfortable, despite weighing in at 0.93 pounds. That said, they will undoubtedly remain a niche product, as they come with all the trappings of audiophile headphones, like easily lost removable cables and adapters, a large, travel-unfriendly design, and a $359 price that – while reasonable for what you get – is pricier than our current pick for best gaming headset for audiophiles, Audeze’s Maxwell.

Asus ROG Kithara Specifications

Swipe to scroll horizontally

Headset

Connectors

3.5mm / 6.3mm / 4.4mm balanced wired cable, USB-C adapter

Drivers

100mm HIFIMAN planar magnetic driver

Frequency Response

8 Hz – 55 kHz

Impedance

16 ohms

Microphone

Pickup Pattern

Unidirectional boom microphone (super-cardi)

Frequency Response

20 Hz – 20 kHz

SNR

74dB

Weight

Headset

420 grams

Asus clearly wants this headset to feel like an audiophile investment. Opening the box, I was greeted by a removable “sound signature certificate” and a note signed in foil ink by Kris Huang, the company’s GM of the gaming and workspace gear business. Under this foam-backed sheet, the headset and its four connectors (3.5 mm, 4.4 mm, and 6.3 mm) present themselves, along with a USB-C adapter that lets you connect the headphone and audio jacks and plug into a PC or other device. The various connectors screw onto the balanced audio cable, which plugs into the bottom of each ear cup. This is all pretty standard stuff for high-end wired headsets (or in-ear monitors), but will probably feel fiddly and foreign to many coming from the gaming headset realm.

Asus ROG Kithara

(Image credit: Tom's Hardware)

But that’s just for using the Kithera as a pair of headphones. If you want to use the mic (you know, to use the headset as a headset), you’ll need to use the shorter braided cable with its permanently attached mic and in-line controller for muting and volume adjustment. The microphone plugs into the left earcup, with the other jack connecting on the right side. This cable is OK, but at only about seven feet, it could be restrictive if you plug the headset into the jacks at the rear of your PC (as you generally should for the best possible audio).

Asus ROG Kithara

(Image credit: Tom's Hardware)

The in-line controller on this cable is the cheapest-feeling part of the Kithera kit, by far. The front houses a large plastic slider for muting the mic (with some red plastic visible so you can tell you’re muted if you look down at it). And there’s a volume wheel on the side, which I’d honestly suggest just not using. Like the in-line controller as a whole, it feels cheap, and it is so sensitive that you can go from zero to max volume with just slightly more than one roll of your thumb. When starting at full volume, I found it difficult to get to a pleasing level of around 75%. As soon as I started to move the wheel, the sound output was too quiet. I quickly resorted to just leaving the volume roller at max and adjusting sound output levels from my keyboard.

In all, there are a lot of connectors, adapters, and cables here. I personally feel like I’d lose something important before too long. But Asus does at least include a full-sized sheet of translucent paper documenting how to connect and use everything. I’d probably lose that, too.

Asus ROG Kithara

(Image credit: Tom's Hardware)

The headset itself feels quite solid, and the only nod to its gaming cred is the ROG logo embossed on each large earcup. Otherwise, the design looks a lot like a stealthier version of HiFiMan’s Ananda line.

I’m not a huge fan of the bare steel headband, which feels a bit utilitarian for something this inexpensive, but the leatherette and mesh interior band, combined with cushy ear pads, make the Kithara the most comfortable headset I’ve worn in… possibly ever. Two sets of ear pads are included, with a second velour pair letting more sounds in and out than the pre-installed pads. To me, both were similarly comfortable, though I might prefer the velour pads in the warmer days of summer, as they feel a bit more breathable. Sound quality aside, there’s a lot to be said for paying a premium for comfort – especially in a device that you may be wearing for several hours a day if you use the Kithera both for work, gaming, and media playback. So I like that these cans are comfy, and that Asus included two sets of ear pads – which are also fairly easy to detach and swap.

These are open-back headphones, though. So don’t expect exterior sounds to be muted or silenced like with closed-back and / or noise-cancelling headphones. And people near you will definitely be able to hear what you are listening to.

Personally, I prefer open-back headphones for their wider sound stage and lower general ear fatigue. For the same reason, I prefer using my AudioEngine PC speakers when working and gaming. But I mostly work from home, with nothing to annoy or distract me other than my cat – open-backs certainly aren’t for everyone, especially if you don’t have other audio solutions for travel or in-office work.

But as these are large, wired headphones, it isn’t likely that many people will regularly be taking the Kithara on their commute or long treks of travel. I have a pair of Sennheiser Momentum 4s for on-the-go listening, and sometimes use them at home, too. But the ROG Kithara headset sounds better and is more comfortable for long-term listening.

I didn’t have enough time to truly test the headset’s removable mic in games. But in a quick check using Windows’ Sound Recorder, it seemed plenty sensitive, but not great at minimizing plosives, despite its foam covering.

After a rough start with the Mattel Aquarius as a child, Matt built his first PC in the late 1990s and ventured into mild PC modding in the early 2000s. He’s spent the last 15 years covering emerging technology for Smithsonian, Popular Science, and Consumer Reports, while testing components and PCs for Computer Shopper, PCMag and Digital Trends.

  • thestryker
    I originally got a pair of HE400 SE headphones because I wear headphones in summer months, only had noise canceling and needed to be able to hear my dad calling if he needed help. They were a pretty great experience given the price so a couple of years later upgraded to the Edition XS which were a good improvement (as long as they fit right).

    The specs on this Asus branded headset seem pretty good relative to the cost which is somewhat surprising given how much of a premium they tend to charge on their stuff.
    Reply
  • wakuwaku
    This cable is OK, but at only about seven feet, it could be restrictive if you plug the headset into the jacks at the rear of your PC (as you generally should for the best possible audio).
    Excuse me? No you don't. Unless you are VERY SURE that among your rear audio jacks there is one for headphone/headsets, you are NOT supposed to plug them into the rear, especially NOT into the Line-Out.

    Many motherboard audio implementations route the headphone amp, and the dedicated DAC if they use one, directly through the front audio connector ONLY. ( I know because I OWN motherboards and Built systems that for others with motherboards that do this). The rear line out is almost always connected straight to the audio codec. It has no business trying to power a headphone, let alone a planar one. Don't be fooled by the 16ohm impedence "only", planars sound like crap without some decent amping. And if your mobo has a dedicated DAC that is not routed through the rear, that just make it even more pointless to plug into the rear.

    If your casing has terrible front audio jack connections, and you can afford this, get a USB DAC. Don't blindly follow this sorry excuse of a tech reporter that pretends to know what he is writing about.
    Reply
  • UnforcedERROR
    wakuwaku said:
    Excuse me? No you don't. Unless you are VERY SURE that among your rear audio jacks there is one for headphone/headsets, you are NOT supposed to plug them into the rear, especially NOT into the Line-Out.

    Many motherboard audio implementations route the headphone amp, and the dedicated DAC if they use one, directly through the front audio connector ONLY. ( I know because I OWN motherboards and Built systems that for others with motherboards that do this). The rear line out is almost always connected straight to the audio codec. It has no business trying to power a headphone, let alone a planar one. Don't be fooled by the 16ohm impedence "only", planars sound like crap without some decent amping. And if your mobo has a dedicated DAC that is not routed through the rear, that just make it even more pointless to plug into the rear.

    If your casing has terrible front audio jack connections, and you can afford this, get a USB DAC. Don't blindly follow this sorry excuse of a tech reporter that pretends to know what he is writing about.
    Not to nitpick, but neither of you really know what you're saying. While I don't disagree with your assertion that you shouldn't plug these into the rear of the motherboard, I'd argue the front is no better.

    First, you mistake the fact that "audio codec" and "DAC" are basically the same thing. A DAC is a digital-to-analog converter, if you're getting sound from a digital source it's going through a DAC. Period. Front port, rear port, both are given a signal from an amp through an internal DAC.

    Second, while you're right about planars and amping, it's because planars need current. At 74db these are very inefficient headphones. The best way to amp these, and no motherboard or case will handle this, is to use an external balanced DAC and amp. This is because true balanced DACs can supply double the voltage of single ended (4 vs 2), which in turn allows double the power through a proper amp. This is also ignoring the benefit of common mode noise rejection, of course.

    Sorry. I'm not trying to come off condescending, I just want to clear this up because it could be helpful to other users considering this product. Personally I wouldn't recommend Hifiman products, as they don't generally hold up well (as someone who has owned a few pairs of their headphones). Were these Dan Clark we might have a different conversation entirely.
    Reply
  • scottslayer
    Hopefully this doesn't fall prey to Hifiman's notoriously shoddy qc.

    :sneaky: who am I kidding, its Hifiman.
    Reply
  • mihen
    The only issue I have with Hifiman is the use of PU leather. The audio quality and size is great. They also have an external wireless DAC, but it is power hungry. Charge it for 6 hours for 2-4 hours of playtime.
    Reply