Antec HCG1000 Extreme 1000W PSU Review: Good Looks For $150

By Aris Mpitziopoulos
published

Why you can trust Tom's Hardware Our expert reviewers spend hours testing and comparing products and services so you can choose the best for you. Find out more about how we test.

EMC Pre-Compliance Testing

To learn more about our EMI testing equipment, please check out How We Test Power Supply Units.

EMI Results - Average Detector

The PSU's EMI filter failed in this test, as evidenced by the increased noise at lower frequencies.

EMI Results - Peak Detector

There are a notable number of spikes in the Peak Detector test, though none of them exceed its limits.

MORE: Best Power SuppliesMORE: How We Test Power SuppliesMORE: All Power Supply Content

Aris Mpitziopoulos
Aris Mpitziopoulos
Contributing Editor

Aris Mpitziopoulos is a Contributing Editor at Tom's Hardware US, covering PSUs.

5 Comments Comment from the forums
  • richardvday
    I am very curious why so many 1000W or larger PSU's ? How many of these do they actually sell ? How many people need a 1000w PSU ? 500-600W seems the sweet spot that most people would need. I have an 850W that I have been kicking myself in the head for ever since really. I need 500W so my efficiency sucks, wasting energy.
    Reply
  • totalinsanity4
    PSUs are actually most efficient when you're at about half load, so people with 500-600W loads will actually be seeing a slightly lower power bill with a 1000W PSU than, for instance, a 650W one
    Reply
  • richardvday
    And idling ?
    Reply
  • crmaris
    modern PSUs featuring LLC resonant converters also have good efficiency under light loads regardless capacity, given that their design is good. With LLC Burst Mode efficiency under light loads vastly improves.
    Reply
  • test_purch1
    Test Automation comment 1535112055212
    Reply