Thermalright Intros Archon SB-E X2 CPU Cooler
Taking after the existing Thermalright Archon heatsink, the SB-E X2 will feature a slim design of just 53 mm across, making it friendly with RAM kits of any kind. The Archon SB-E X2 also borrows the same eight 6 mm copper heatpipe design from its predecessor, making it just as efficient at dispersing heat. The heatsink is also fully nickel-plated to reduce oxidation, rust and improve overall appearance.
However, the Archon SB-E X2 brings plenty of new features to the table, including the all new VX BTKII mounting system which includes Thermalright's pressure bracket. The pressure bracket allows users to safely increase heatsink pressure between 40 to 70 pounds.
The Thermalright Archon SB-E X2 is equipped with two PWM-controlled TY-141 140 mm silent fans, which are rated at a maximum of 73.6 CFM, while measuring 21 DBA.
The Thermalright Archon SB-E X2 has an MSRP of $99.99, for more information visit the Archon SB-E X2 product page.
Get Tom's Hardware's best news and in-depth reviews, straight to your inbox.
-
Derbixrace it will probably beat the venomous x by a few degrees, i think its close to the silver arrow.Reply -
anononon I dont understand the market for these type of coolers, at this price point. Considering the basic all-in one liquid coolers are as low as $60.00 bucks in the right areas. Not only cheaper, but do a MUCH better job. At a $100.00 dollar price point, why wouldnt I just buy an H80/H100?Reply
What am I missing here? Please! -
jimmysmitty anonononI dont understand the market for these type of coolers, at this price point. Considering the basic all-in one liquid coolers are as low as $60.00 bucks in the right areas. Not only cheaper, but do a MUCH better job. At a $100.00 dollar price point, why wouldnt I just buy an H80/H100? What am I missing here? Please!Reply
When I got my 2500K I had to choose between a Zalman 9900Max B or a Corsair Hydro H100. From every review I have found on the web, the Corsair Hydro H100 is still a bit worse than the 9900Max B and would have cost $120 (at the time) vs $75.
I went with the 9900Max B and its quite and cools my 2500K very well when running full load at 4.5GHz.
The problem with the closed loop coolers is that they can only do so much and compared to this or other high end air coolers, it just doesn't cut it. -
kenyee and how does it compare w/ the Hyper 212 Evo? This looks slimmer and taller but that also means less cooling capacity..Reply -
balister kenyeeand how does it compare w/ the Hyper 212 Evo? This looks slimmer and taller but that also means less cooling capacity..Reply
It all comes down to surface area of the heat sink. While this maybe thinner, the additional height may have let them add in a few more fins that might have increased the overall surface area to a higher amount. So really, without having a given surface area for this heatsink, it's difficult to tell which would be better until we get that information and test. -
samuelspark anonononI dont understand the market for these type of coolers, at this price point. Considering the basic all-in one liquid coolers are as low as $60.00 bucks in the right areas. Not only cheaper, but do a MUCH better job. At a $100.00 dollar price point, why wouldnt I just buy an H80/H100? What am I missing here? Please!Reply
Budget all in ones are not worth it. An Antec 620 or H60 only matches the Hyper 212 Evo and costs $20 more.