Skip to main content

Aresgame AGS750 Power Supply Review: Less Efficient Than We'd Hoped

A power supply that doesn't deserve a Gold efficiency badge.

Aresgame AGS750
(Image: © Tom's Hardware)

Advanced Transient Response Tests

For details about our transient response testing, please click here.

In the real world, power supplies are always working with loads that change. It's of immense importance, then, for the PSU to keep its rails within the ATX specification's defined ranges. The smaller the deviations, the more stable your PC will be with less stress applied to its components. 

We should note that the ATX spec requires capacitive loading during the transient rests, but in our methodology, we also choose to apply a worst case scenario with no additional capacitance on the rails. 

Advanced Transient Response at 20% – 20ms

VoltageBeforeAfterChangePass/Fail
12V12.310V12.049V2.11%Pass
5V5.067V4.946V2.38%Pass
3.3V3.393V3.142V7.41%Pass
5VSB4.991V4.924V1.34%Pass

Advanced Transient Response at 20% – 10ms

VoltageBeforeAfterChangePass/Fail
12V12.309V12.058V2.04%Pass
5V5.067V4.918V2.93%Pass
3.3V3.393V3.154V7.04%Pass
5VSB4.991V4.902V1.78%Pass

Advanced Transient Response at 20% – 1ms

VoltageBeforeAfterChangePass/Fail
12V12.309V12.063V2.00%Pass
5V5.066V4.911V3.06%Pass
3.3V3.393V3.155V7.02%Pass
5VSB4.991V4.920V1.43%Pass

Advanced Transient Response at 50% – 20ms

VoltageBeforeAfterChangePass/Fail
12V12.255V12.012V1.98%Pass
5V5.024V4.898V2.50%Pass
3.3V3.359V3.096V7.83%Fail
5VSB4.935V4.868V1.35%Pass

Advanced Transient Response at 50% – 10ms

VoltageBeforeAfterChangePass/Fail
12V12.254V12.018V1.93%Pass
5V5.024V4.869V3.08%Pass
3.3V3.359V3.109V7.45%Fail
5VSB4.935V4.835V2.03%Pass

Advanced Transient Response at 50% – 1ms

VoltageBeforeAfterChangePass/Fail
12V12.254V12.028V1.85%Pass
5V5.023V4.866V3.12%Pass
3.3V3.360V3.109V7.49%Fail
5VSB4.935V4.834V2.05%Pass
Image 1 of 8

Aresgame AGS750

(Image credit: Tom's Hardware)
Image 2 of 8

Aresgame AGS750

(Image credit: Tom's Hardware)
Image 3 of 8

Aresgame AGS750

(Image credit: Tom's Hardware)
Image 4 of 8

Aresgame AGS750

(Image credit: Tom's Hardware)
Image 5 of 8

Aresgame AGS750

(Image credit: Tom's Hardware)
Image 6 of 8

Aresgame AGS750

(Image credit: Tom's Hardware)
Image 7 of 8

Aresgame AGS750

(Image credit: Tom's Hardware)
Image 8 of 8

Aresgame AGS750

(Image credit: Tom's Hardware)

Transient response at 12V is satisfactory, for the category's standards, at least, and quite good at 5V and 5VSB. On the contrary, 3.3V rail's transient response is terrible. 

Turn-On Transient Tests

In the next set of tests, we measure the PSU's response in simpler transient load scenarios—during its power-on phase. Ideally, we don't want to see any voltage overshoots or spikes since those put a lot of stress on the DC-DC converters of installed components.

Image 1 of 3

Aresgame AGS750

(Image credit: Tom's Hardware)
Image 2 of 3

Aresgame AGS750

(Image credit: Tom's Hardware)
Image 3 of 3

Aresgame AGS750

(Image credit: Tom's Hardware)

Turn-on transient response is not perfect, for sure, but you cannot call it bad, either. 

Power Supply Timing Tests

There are several signals generated by the power supply, which need to be within specified, by the ATX spec, ranges. If they are not, there can be compatibility issues with other system parts, especially mainboards. From year 2020, the PSU's power-on time (T1) has to be lower than 150ms and the PWR_OK delay (T3) from 100 to 150ms, to be compatible with the Alternative Sleep Mode.

PSU Timings Table
T1 (Power-on time) & T3 (PWR_OK delay)
LoadT1T3
20%48ms328ms
100%48ms328ms
Image 1 of 4

AGS750

(Image credit: Tom's Hardware)

PSU Timing Charts

Image 2 of 4

AGS750

(Image credit: Tom's Hardware)
Image 3 of 4

AGS750

(Image credit: Tom's Hardware)
Image 4 of 4

AGS750

(Image credit: Tom's Hardware)

The Power-on time is low so that the PSU won't have an issue even with "picky" mainboards. The PWR_OK delay is out of the 100-150ms region, so there is no support for alternative sleep modes.

Ripple Measurements

Ripple represents the AC fluctuations (periodic) and noise (random) found in the PSU's DC rails. This phenomenon significantly decreases the capacitors' lifespan because it causes them to run hotter. A 10-degree Celsius increase can cut into a cap's useful life by 50%. Ripple also plays an important role in overall system stability, especially when overclocking is involved.

The ripple limits, according to the ATX specification, are 120mV (+12V) and 50mV (5V, 3.3V, and 5VSB).

Test12V5V3.3V5VSBPass/Fail
10% Load15.7 mV23.7 mV17.8 mV9.5 mVPass
20% Load14.2 mV24.2 mV16.8 mV10.8 mVPass
30% Load16.2 mV25.4 mV18.2 mV11.7 mVPass
40% Load17.5 mV25.5 mV18.7 mV12.8 mVPass
50% Load21.1 mV28.5 mV22.7 mV15.5 mVPass
60% Load27.5 mV32.6 mV26.0 mV18.2 mVPass
70% Load34.4 mV34.6 mV30.0 mV21.4 mVPass
80% Load41.7 mV37.9 mV32.6 mV23.6 mVPass
90% Load49.2 mV39.4 mV36.1 mV26.5 mVPass
100% Load67.1 mV43.9 mV43.0 mV32.1 mVPass
110% Load77.1 mV46.8 mV47.1 mV34.4 mVPass
Crossload 118.2 mV34.2 mV28.0 mV12.5 mVPass
Crossload 216.8 mV39.3 mV26.7 mV12.4 mVPass
Crossload 316.1 mV27.4 mV24.9 mV11.3 mVPass
Crossload 464.7 mV36.0 mV36.9 mV26.3 mVPass
Image 1 of 4

ARESGAME AGS750

(Image credit: Tom's Hardware)
Image 2 of 4

ARESGAME AGS750

(Image credit: Tom's Hardware)
Image 3 of 4

ARESGAME AGS750

(Image credit: Tom's Hardware)
Image 4 of 4

ARESGAME AGS750

(Image credit: Tom's Hardware)

Ripple suppression is mediocre on all rails, especially the minor ones. We didn't expect better results here, given the filtering caps used on the PSU's secondary side. 

Ripple At Full Load

Image 1 of 4

ARESGAME AGS750

(Image credit: Tom's Hardware)
Image 2 of 4

ARESGAME AGS750

(Image credit: Tom's Hardware)
Image 3 of 4

ARESGAME AGS750

(Image credit: Tom's Hardware)
Image 4 of 4

ARESGAME AGS750

(Image credit: Tom's Hardware)

Ripple At 110% Load

Image 1 of 4

ARESGAME AGS750

(Image credit: Tom's Hardware)
Image 2 of 4

ARESGAME AGS750

(Image credit: Tom's Hardware)
Image 3 of 4

ARESGAME AGS750

(Image credit: Tom's Hardware)
Image 4 of 4

ARESGAME AGS750

(Image credit: Tom's Hardware)

Ripple At Cross-Load 1

Image 1 of 4

ARESGAME AGS750

(Image credit: Tom's Hardware)
Image 2 of 4

ARESGAME AGS750

(Image credit: Tom's Hardware)
Image 3 of 4

ARESGAME AGS750

(Image credit: Tom's Hardware)
Image 4 of 4

ARESGAME AGS750

(Image credit: Tom's Hardware)

Ripple At Cross-Load 4

Image 1 of 4

ARESGAME AGS750

(Image credit: Tom's Hardware)
Image 2 of 4

ARESGAME AGS750

(Image credit: Tom's Hardware)
Image 3 of 4

ARESGAME AGS750

(Image credit: Tom's Hardware)
Image 4 of 4

ARESGAME AGS750

(Image credit: Tom's Hardware)

EMC Pre-Compliance Testing – Average & Quasi-Peak EMI Detector Results

Electromagnetic Compatibility (EMC) is the ability of a device to operate properly in its environment without disrupting the proper operation of other nearby devices.

Electromagnetic Interference (EMI) stands for the electromagnetic energy a device emits, and it can cause problems in other nearby devices if too high. For example, it can be the cause of increased static noise in your headphones or/and speakers.

(Image credit: Tom's Hardware)

EMI emissions are high below 1MHz, with both average and peak EMI detectors. 

MORE: Best Power Supplies

MORE: How We Test Power Supplies

MORE: All Power Supply Content

Aris Mpitziopoulos
Aris Mpitziopoulos is a Contributing Editor at Tom's Hardware US, covering PSUs.
  • Aeacus
    Correction:

    OEM of AGS750 is not Aresgame.
    Aresgame is just a brand, like Corsair or EVGA.

    OEM of AGS750 is: Shenzhenshi Jiumeng Electronics Technology Co.,ltd.
    My proof, trademark registration application: https://uspto.report/TM/88619100
    Reply